Brass Sheet
Brass Sheet based on electrolytic copper, zinc and trace elements as its raw material, through processing by ingot, hot rolling, cold rolling, heat treatment, surface cleaning, κοπή, finishing, and then packing. Material processes performance, plasticity, mechanical properties, corrosion resistance, performance and good tin.
It has been widely used in electrical, automotive, communications, hardware, decoration and other industries.
If you need more information,please contact us sales@tubesolutions.com.cn
- Περιγραφή
- Εξέταση
Περιγραφή
Product Introduction
Brass Sheet based on electrolytic copper, zinc and trace elements as its raw material, through processing by ingot, hot rolling,
cold rolling, heat treatment, surface cleaning, κοπή, finishing, and then packing. Material processes performance, plasticity,
mechanical properties, corrosion resistance, performance and good tin.
It has been widely used in electrical, automotive, communications, hardware, decoration and other industries.
Main Technical Parameters
2-1Chemical Composition
Name | Alloy No. | Chemical Composition (%, Max.) | ||||||||
Cu | Fe | Pb | Al | Μν | Sn | Ni | Zn | Impurity | ||
Brass | H96 | 95.0-97.0 | 0.10 | 0.03 | — | — | — | 0.5 | Rem | 0.3 |
H90 | 88.0-91.0 | 0.10 | 0.03 | — | — | — | 0.5 | Rem | 0.3 | |
H85 | 84.0-86.0 | 0.10 | 0.03 | — | — | — | 0.5 | Rem | 0.3 | |
H70 | 68.5-71.5 | 0.10 | 0.03 | — | — | — | 0.5 | Rem | 0.3 | |
H68 | 67.0-70.0 | 0.10 | 0.03 | — | — | — | 0.5 | Rem | 0.3 | |
H65 | 63.5-68.0 | 0.10 | 0.03 | — | — | — | 0.5 | Rem | 0.3 | |
H63 | 62.0-65.0 | 0.15 | 0.08 | — | — | — | 0.5 | Rem | 0.5 | |
H62 | 60.5-63.5 | 0.15 | 0.08 | — | — | — | 0.5 | Rem | 0.5 |
2-2 Alloy Table
Name | Κίνα | ISO | ASTM | JIS |
Brass | H96 | CuZn5 | C21000 | C2100 |
H90 | CuZn10 | C22000 | C2200 | |
H85 | CuZn15 | C23000 | C2300 | |
H70 | CuZn30 | C26000 | C2600 | |
H68 | — | — | — | |
H65 | CuZn35 | C27000 | C2700 | |
H63 | CuZn37 | C27200 | C2720 | |
H62 | CuZn40 | C28000 | C2800 |
2-3 Features
2-3-1 Specification Unit:χιλ.
Name | Alloy No.(Κίνα) | Temper | Size(χιλ.) | ||
Thickness | Width | Length | |||
Brass | H59 H62 H63 H65 H68 H70 | R | 4~8 | 600~1000 | ≤3000 |
H62 H65 H68 | Y Y2 | 0.2~0.49 | 600 | 1000~2000 | |
0.5~3.0 | 600~1000 | 1000~3000 |
Temper Mark:O. Soft;1/4H. 1/4 Hard;1/2H. 1/2 Hard;H. Hard;EH. Ultrahard;R. Hot Rolled.
2-3-2 Tolerance Unit: χιλ.
Thickness | Width | |||||
Thickness Allow Deviation ± | Width Allow Deviation ± | |||||
<400 | <600 | <1000 | <400 | <600 | <1000 | |
0.5~0.8 | 0.035 | 0.050 | 0.080 | 0.3 | 0.3 | 1.5 |
0.8~1.2 | 0.040 | 0.060 | 0.090 | 0.3 | 0.5 | 1.5 |
1.2~2.0 | 0.050 | 0.080 | 0.100 | 0.3 | 0.5 | 2.5 |
2.0~3.2 | 0.060 | 0.100 | 0.120 | 0.5 | 0.5 | 2.5 |
Temper | Tensile Strength N/mm2 | Elongation ≥% | Hardness HV | |
M | (O) | ≥290 | 35 | — |
Y4 | (1/4H) | 325-410 | 30 | 75-125 |
Y2 | (1/2H) | 340-470 | 20 | 85-145 |
Y | (H) | 390-630 | 10 | 105-175 |
T | (EH) | ≥490 | 2.5 | ≥145 |
R | — | — | — |
Temper Mark:M. Soft;Y4. 1/4 Hard;Y2. Hard;Y. Hard;T. Ultra hard