Brass Sheet
Brass Sheet based on electrolytic copper, zinc and trace elements as its raw material, through processing by ingot, hot rolling, cold rolling, heat treatment, surface cleaning, taglio, finishing, and then packing. Material processes performance, plasticity, mechanical properties, resistenza alla corrosione, performance and good tin.
It has been widely used in electrical, automotive, communications, hardware, decoration and other industries.
If you need more information,please contact us sales@tubesolutions.com.cn
- Descrizione
- Inchiesta
Descrizione
Product Introduction
Brass Sheet based on electrolytic copper, zinc and trace elements as its raw material, through processing by ingot, hot rolling,
cold rolling, heat treatment, surface cleaning, taglio, finishing, and then packing. Material processes performance, plasticity,
mechanical properties, resistenza alla corrosione, performance and good tin.
It has been widely used in electrical, automotive, communications, hardware, decoration and other industries.
Main Technical Parameters
2-1Composizione chimica
Name | Alloy No. | Composizione chimica (%, Max.) | ||||||||
Cu | Fe | Pb | Al | Mn | Sn | Ni | Zn | Impurity | ||
Brass | H96 | 95.0-97.0 | 0.10 | 0.03 | — | — | — | 0.5 | Rem | 0.3 |
H90 | 88.0-91.0 | 0.10 | 0.03 | — | — | — | 0.5 | Rem | 0.3 | |
H85 | 84.0-86.0 | 0.10 | 0.03 | — | — | — | 0.5 | Rem | 0.3 | |
H70 | 68.5-71.5 | 0.10 | 0.03 | — | — | — | 0.5 | Rem | 0.3 | |
H68 | 67.0-70.0 | 0.10 | 0.03 | — | — | — | 0.5 | Rem | 0.3 | |
H65 | 63.5-68.0 | 0.10 | 0.03 | — | — | — | 0.5 | Rem | 0.3 | |
H63 | 62.0-65.0 | 0.15 | 0.08 | — | — | — | 0.5 | Rem | 0.5 | |
H62 | 60.5-63.5 | 0.15 | 0.08 | — | — | — | 0.5 | Rem | 0.5 |
2-2 Alloy Table
Name | Cina | ISO | ASTM | JIS |
Brass | H96 | CuZn5 | C21000 | C2100 |
H90 | CuZn10 | C22000 | C2200 | |
H85 | CuZn15 | C23000 | C2300 | |
H70 | CuZn30 | C26000 | C2600 | |
H68 | — | — | — | |
H65 | CuZn35 | C27000 | C2700 | |
H63 | CuZn37 | C27200 | C2720 | |
H62 | CuZn40 | C28000 | C2800 |
2-3 Features
2-3-1 Specification Unit:millimetro
Name | Alloy No.(Cina) | Temper | Size(millimetro) | ||
Thickness | Width | Length | |||
Brass | H59 H62 H63 H65 H68 H70 | R | 4~8 | 600~1000 | ≤3000 |
H62 H65 H68 | Y Y2 | 0.2~0.49 | 600 | 1000~2000 | |
0.5~3.0 | 600~1000 | 1000~3000 |
Temper Mark:O. Soft;1/4H. 1/4 Hard;1/2H. 1/2 Hard;H. Hard;EH. Ultrahard;R. Hot Rolled.
2-3-2 Tolerance Unit: millimetro
Thickness | Width | |||||
Thickness Allow Deviation ± | Width Allow Deviation ± | |||||
<400 | <600 | <1000 | <400 | <600 | <1000 | |
0.5~0.8 | 0.035 | 0.050 | 0.080 | 0.3 | 0.3 | 1.5 |
0.8~1.2 | 0.040 | 0.060 | 0.090 | 0.3 | 0.5 | 1.5 |
1.2~2.0 | 0.050 | 0.080 | 0.100 | 0.3 | 0.5 | 2.5 |
2.0~3.2 | 0.060 | 0.100 | 0.120 | 0.5 | 0.5 | 2.5 |
Temper | Resistenza alla trazione N/mm2 | Allungamento ≥% | Hardness HV | |
M | (O) | ≥290 | 35 | — |
Y4 | (1/4H) | 325-410 | 30 | 75-125 |
Y2 | (1/2H) | 340-470 | 20 | 85-145 |
Y | (H) | 390-630 | 10 | 105-175 |
T | (EH) | ≥490 | 2.5 | ≥145 |
R | — | — | — |
Temper Mark:M. Soft;Y4. 1/4 Hard;Y2. Hard;Y. Hard;T. Ultra hard