Brass Sheet
Brass Sheet based on electrolytic copper, zinc and trace elements as its raw material, through processing by ingot, 間 圧延, cold rolling, heat treatment, surface cleaning, 切断, finishing, and then packing. Material processes performance, plasticity, mechanical properties, 耐食性, performance and good tin.
It has been widely used in electrical, automotive, communications, hardware, decoration and other industries.
詳細情報が必要な場合,please contact us sales@tubesolutions.com.cn
- 形容
- 照会
形容
Product Introduction
Brass Sheet based on electrolytic copper, zinc and trace elements as its raw material, through processing by ingot, 間 圧延,
cold rolling, heat treatment, surface cleaning, 切断, finishing, and then packing. Material processes performance, plasticity,
mechanical properties, 耐食性, performance and good tin.
It has been widely used in electrical, automotive, communications, hardware, decoration and other industries.
Main Technical Parameters
2-1Chemical Composition
Name | Alloy No. | Chemical Composition (%, Max.) | ||||||||
銅 | Fe | Pb | Al | Mn | Sn | Ni | Zn | Impurity | ||
Brass | H96 | 95.0-97.0 | 0.10 | 0.03 | — | — | — | 0.5 | Rem | 0.3 |
H90 | 88.0-91.0 | 0.10 | 0.03 | — | — | — | 0.5 | Rem | 0.3 | |
H85 | 84.0-86.0 | 0.10 | 0.03 | — | — | — | 0.5 | Rem | 0.3 | |
H70 | 68.5-71.5 | 0.10 | 0.03 | — | — | — | 0.5 | Rem | 0.3 | |
H68 | 67.0-70.0 | 0.10 | 0.03 | — | — | — | 0.5 | Rem | 0.3 | |
H65 | 63.5-68.0 | 0.10 | 0.03 | — | — | — | 0.5 | Rem | 0.3 | |
H63 | 62.0-65.0 | 0.15 | 0.08 | — | — | — | 0.5 | Rem | 0.5 | |
H62 | 60.5-63.5 | 0.15 | 0.08 | — | — | — | 0.5 | Rem | 0.5 |
2-2 Alloy Table
Name | 中国 | .ISO | ティッカー | ティッカー |
Brass | H96 | CuZn5 | C21000 | C2100 |
H90 | CuZn10 | C22000 | C2200 | |
H85 | CuZn15 | C23000 | C2300 | |
H70 | CuZn30 | C26000 | C2600 | |
H68 | — | — | — | |
H65 | CuZn35 | C27000 | C2700 | |
H63 | CuZn37 | C27200 | C2720 | |
H62 | CuZn40 | C28000 | C2800 |
2-3 Features
2-3-1 Specification Unit:ミリメートル
Name | Alloy No.(中国) | 癇癪 | 大きさ(ミリメートル) | ||
Thickness | Width | 長さ | |||
Brass | H59 H62 H63 H65 H68 H70 | R | 4~8 | 600~1000 | ≤3000 |
H62 H65 H68 | Y Y2 | 0.2~0.49 | 600 | 1000~2000 | |
0.5~3.0 | 600~1000 | 1000~3000 |
Temper Mark:O. Soft;1/4H. 1/4 Hard;1/2H. 1/2 Hard;H. Hard;EH. Ultrahard;R. Hot Rolled.
2-3-2 Tolerance Unit: ミリメートル
Thickness | Width | |||||
Thickness Allow Deviation ± | Width Allow Deviation ± | |||||
<400 | <600 | <1000 | <400 | <600 | <1000 | |
0.5~0.8 | 0.035 | 0.050 | 0.080 | 0.3 | 0.3 | 1.5 |
0.8~1.2 | 0.040 | 0.060 | 0.090 | 0.3 | 0.5 | 1.5 |
1.2~2.0 | 0.050 | 0.080 | 0.100 | 0.3 | 0.5 | 2.5 |
2.0~3.2 | 0.060 | 0.100 | 0.120 | 0.5 | 0.5 | 2.5 |
癇癪 | Tensile Strength N/mm2 | 伸長 ≥% | Hardness HV | |
M | (O) | ≥290 | 35 | — |
Y4 | (1/4H) | 325-410 | 30 | 75-125 |
2歳 | (1/2H) | 340-470 | 20 | 85-145 |
Y | (H) | 390-630 | 10 | 105-175 |
T | (EH) | ≥490 | 2.5 | ≥145 |
R | — | — | — |
Temper Mark:M. Soft;Y4. 1/4 Hard;2歳. Hard;Y. Hard;T. Ultra hard