Air-conditioner Copper Tubes
Copper tubes are easy to install, inexpensive to transport and have long life spans with low maintenance. Because they are compatible with a large range of liquids and are so resistant to a wide variety of environmental conditions, tubes made of copper provide a long term performance that is extremely cost effective over long periods of time. They form piping systems both above and below ground, in freezing temperatures as well as in high heat applications. Fire sprinkler systems, cryogenic plants, air conditioning and refrigeration systems, hospital oxygen systems, gas and steam heating systems and drain/vent systems all use copper tubes as pipes. They also take up less space than other metal pipes.
Copper tube has good conductivity and is the main material of conductive accessories and heat dissipation accessories of electronic products. Copper tubes have strong corrosion resistance, are not easy to oxidize and react with some liquid substances. It is the first choice for modern contractors to install water pipes, heating and cooling pipes of all residential commercial houses.
Copper tubes are also called copper tubes. The utility model relates to a non-ferrous metal pipe, which is a pressed and drawn seamless pipe. Copper pipe has the characteristics of good conductivity and thermal conductivity. It is the main material of conductive fittings and heat dissipation fittings for electronic products, and has become the first choice for modern contractors to install water pipes, heating and cooling pipes in all residential commercial buildings. Copper tubes have strong corrosion resistance, are not easy to be oxidized and react with some liquid substances, so they are easy to be bent and formed.
About 75% of copper tubes in China are used in the refrigeration industry. Because of its excellent flexibility, thermal conductivity and corrosion resistance, copper pipes are widely used in the evaporator, condenser, connecting pipes, pipes and pipe fittings of air conditioners, refrigerators and freezers, among which air conditioners are the main downstream. In 2021, the output of air conditioners, household refrigerators and freezers will increase significantly. In the first half of the year, the output will be 15.85 million units, 44.35 million units and 15.85 million units, respectively, 21%, 19% and 42%. The increase of refrigeration output will drive the demand for copper tubes for refrigeration.
- Description
- Inquiry
Description
In order to ensure safety and quality, all copper tubes must adhere to strict ASTM (American Society for Testing and Materials) standards concerning copper purity, design, fittings and liquid/gas compatibility. They are generally formed by the extrusion process, which fabricates seamless tubes with uniform wall thickness and a smooth surface. Solid-profile copper billets in the shape of rods are heated until malleable and then forced through a series of smaller and smaller molds in the shape of a tube until the desired shape has been reached. After extrusion, they are often bent using rollers or mandrels, and attached to each other at the ends by welding.
Most copper tubes have threaded ends, one male and one female, so they can easily attach and detach from one another. The threading is non-permanent but still provides a reliable, air and water tight seal. Sometimes tubes are joined by brazing, a welding technique that uses nonferrous filler material. A benefit of copper tubes is their flammability and explosion resistance. If a fire does start within the tube, it will not travel farther into the pipe system. Copper tubes can have either soft or hard tempers, which is the metal’s overall hardness. This is accomplished by post-fabrication heat treatments.
Products | copper tube |
Application | Air Condition Or Refrigerator |
Thickness | 0.8-1.0mm |
Cu (Min) | 99% |
Alloy | Non-Alloy |
Length | 1-12m |
Ultimate Strength (≥ MPa) | 550 |
Elongation (≥ %) | 99 |
Outside Diameter | 4.76mm,6.35mm.8.00mm.9.53mm,12.70mm etc |
Processing Service | Bending, Decoiling, Welding, Punching, Cutting |
Lead Time | 7-15 working days after the receipt of 30% deposit |
Payment Terms | 30% deposit+70% before shipment for LCL order |
Price Terms | FOB, EXW, CIF, CFR |
Packing | Wooden package or according to customer’s requirements |
Test 1
Test 2
Tungsten Carbide End Mills Tungsten Carbide Drill Bits Tungsten Carbide Reamers Customised Milling Cutters
