Никель 200/201 Трубы
What Is Nickel Alloy Pipe?
A nickel alloy pipe is a device that allows for swift movement of flow in different applications. The Nickel 200 Pipe is recognized by its schedule and nominal diameters. These pipes are generally produced in a circular cross-section and require special equipment to shape them. A Nickel Alloy Pipe is generally produced in hot rolled conditions and is designed to accommodate larger applications. The Ni200 Hollow Pipe is designed with a minimum tensile strength of 462mpa with a minimum yield strength of 148mpa. They can be elongated by 45% in the system. These pipes can be produced in seamless and welded specifications. The Alloy 200 Seamless Pipe are manufactured as hot steel billets are passed through metal to shape them. These pipes are slightly expensive in comparison to an Alloy 200 Welded Pipe. The welded pipes offer a cost-effective alternative to seamless pipes. These pipes are reliable and have a longer service life. The Nickel 200 Welded Pipe is produced in continuous lengths and is recommended in lower pressure and temperature setups. These pipes have consistent wall thickness but have poor ovality and roundness.
- Описание
- Запрос
Описание
Никель 200 (UNS N02200)
Никель 201 (UNS N02201)
Никель 200 tube is a solid solution strengthened wrought pure alloy. Никель 200 Tube is designed with a primary constituent of nickel with strengthening alloys like iron, manganese, silicon, copper, carbon, and sulfur. These tubes have exceptional resistance to caustic alkalis and corrosive media. The Alloy 200 Round Tubing has a low gas content and vapor pressure. This tubing has a higher thermal and electrical conductivity. They work in operating temperatures up to 600 degrees F. ASTM B725/ B161 Nickel Alloy 200 Seamless Tube is a single piece of metal that is produced via the extrusion process. These tubes exhibit exceptional strength and have good load-bearing capacity. The ASTM B161 Alloy 200 Seamless Tubing is manufactured in shorter lengths due to the manufacturing difficulties. This tubing has a density of 8.89 g/cm3 and possesses a melting point between 1435 to 1446 degrees C. A WERKSTOFF NR. 2.4066 Seamless Tubing is approved for use in manufacturing boiler tubes. This tubing is ferromagnetic and highly ductile. The tubing is generally welded using shop fabrication processes. Никель 200 Cold Rolled Coiled Tube are seen in different drilling operations and have a smooth surface finish. These tubes work well in different temperature and reducing environments. The Nickel 200 Tube Suppliers supply tubes that are seen in electronic components. Chemical processing, aerospace equipment, food processing, synthetic fiber production, rocket motors, and so on.
Сплав 200/201 is extremely resistance to caustic alkalies up to and including the molten state. The extra-low carbon content of Alloy 200/201 gives virtual immunity to intergranular attack above about 315°C. The presence of chlorates must be kept to a minimum, as they accelerate the rate of attack.Good resistance to corrosion in acids and alkalis and is most useful under reducing conditions.
Outstanding resistance to caustic alkalis up to and including the molten state. In acid, alkaline and neutral salt solutions the material shows good resistance, but in oxidizing salt solutions severe attack will occur. Resistant to all dry gases at room temperature and in dry chlorine and hydrogen chloride may be used in temperatures up to 550C.
Resistance to mineral acids varies according to temperature and concentration and whether the solution is aerated or not. Corrosion resistance is better in de-aerated acid.
CHEMICAL COMPOSITION | |||||||
Сплав | Ni+Co % | Mn % | Fe % | Si % | Cu % | C % | S % |
Никель 201 | Мин 99.2 | Max 0.35 | Max 0.4 | Max 0.35 | Max 0.25 | Max 0.02 | Max 0.01 |
Никель 200 | Мин 99 | Max 0.35 | Max 0.4 | Max 0.35 | Max 0.25 | Max 0.15 | Max 0.01 |
Physical Data | |||||
Density | Specific Heat | Electrical Resistivity | Melting Point | Thermal Conductivity | Mean Coeff Thermal Expansion |
8.89g/cm3 | 0.109(456 J/kg.℃) | 0.096×10-6ohm.m | 1435-1446°С | 70.2 W/m-K | 13.3×10-6m/m.℃ |
Typical Mechanical Properties | ||||
Mechanical Properties | Tensile Strength | Предел текучести | Удлинение | Стандарт |
Никель 200 | 462 Mpa | 148 Mpa | 47% | ASTM B161/B163/B725/B751 |
* Production of viscose rayon. Manufacture of soap.
* Analine hydrochloride production and in the chlorination of aliphatic hydrocarbons such as benzene, methane and ethane.
* Manufacture of vinyl chloride monomer.
* Reactors and vessels in which fluorine is generated and reacted with hydrocarbons.
* Processes using caustic alkalines
* Food Processing
* Synthethic Fiber Production
Product Name | Nickel Alloy Precision Pipes |
Outer Diameter | 6.00mm-914.00mm as your request |
Толщина стенки | 0.30mm-30.00mm as your request |
Length | 1 meters to 6 счетчики или по требованию заказчика |
Классификация материалов | Сплав монеля：МОНЕЛЬ К-500, Монель400/2.4360, Монель 404 Специальная нержавеющая сталь：904Л/УНС N08904/DIN1.4539, 254SMO/UNS S31254,253MA, 316Ти, 347H.
Сплав инконеля：Инконель840 (С33400), Инконель 686 (2.4606-Н06686),Инконель725(НЕТ7725), Инконель713С (2.4671), Инконель625 (2.4856),Инконель602ca(Н06625), Инконель601 (2.4851), Инконель600 (2.4816), Инконель 690 (2.4642), Инконель617 (Н06617), ИнконельX-750 (750),Инконель804,Инконель718 (2.4668).
Сплав Инколой：Инколой 800HT, Инколой 890/1. 6569, Инколой 810, Инколой801, Инколой 840 / UNS S33400, Инколой 20 / UNS N08020, Инколой 926/UNSN08926/1.4529, Инколой 901 / УНС N09901/2. 4662, Incoloy330/UNS N08330/1. 488, Инколой945/ (УНС N09945) , Инколой А-286 /(УНСС66286/1.4980) , Инколой 825/2.4858, Инколой 925 / UNS N09925, Инколой 800H / 800HT / 800AT.
Сплав хастеллоя：Сплав HastelloyB-2 / Сплав Hastelloy B-2, Сплав хастеллояB3 / сплав хастеллоя B3, Сплав Hastelloy C-2000 / Сплав HastelloyC-2000, Хастеллой С-4 / Хастеллой СплавC-4 / 2. 4610, Hastelloy C-22 / Hastelloy AlloyC22, Сплав HastelloyC-276 / Hastelloy C-276.
Жаропрочный сплав：GH3308, GH3304, GH4090, GH738, GH3030, GH159 (GH6159) , GH3039, GH3044, GH3536, GH5188, GH1131, GH4141,GH2026, GH738, GH80A,GH4090, GH3600, GH2132, GH3625, GH3128, GH4145, GH4169, GH605 (GH5605) , GH93 (GH4093) , GH159 (GH6159) , Incoloy A-286,Inconel718, Incoloy825/2. 4858. |
Surface Treatment | яркий отожженный,полированный,pickled etc |
Пакет | Bundle, In bulk, Bags, wooden box as your request |
