Copper corrugated pipes of circular section are used in water supply systems for cold and hot water (steam) heating, cooling, sewerage, water treatment facilities and heat exchangers, 에어컨. The small wall thickness makes it easy to carry out any manipulations with pipes – 절단, 굽힘.
Advantages of copper pipes:
1. 경량, with good thermal conductivity and high low-temperature strength. Commonly used in the manufacturing of heat exchange equipment (such as condensers). It is also used for assembling low-temperature pipelines in oxygen production equipment. Copper pipes with small diameters are commonly used for conveying pressurized liquids (such as lubrication systems, oil pressure systems, 등.) and as pressure measuring pipes for instruments.
2. Copper pipes have strong and corrosion-resistant properties, making them the preferred choice for modern contractors to install water pipes, heating, and cooling pipes in all residential commercial buildings.
3. Copper tube combines many advantages in one body: it is strong and has the high strength of ordinary metals; 동시에, it is more prone to bending, twisting, cracking, and breaking than ordinary metals, and has a certain degree of frost heave and impact resistance. 그러므로, once installed, copper water pipes in water supply systems in buildings are safe and reliable to use, and even do not require maintenance and upkeep.
Disadvantages of copper pipes: As far as copper pipes are concerned, their high price is their biggest disadvantage, and they are currently the most high-end water pipes. They are usually installed using welding technology and will not leak for a lifetime. The connection at the copper pipe interface mainly depends on the level of construction technology and has high requirements for construction quality.
동관 are easy to install, inexpensive to transport and have long life spans with low maintenance. Because they are compatible with a large range of liquids and are so resistant to a wide variety of environmental conditions, tubes made of copper provide a long term performance that is extremely cost effective over long periods of time. They form piping systems both above and below ground, in freezing temperatures as well as in high heat applications. Fire sprinkler systems, cryogenic plants, air conditioning and refrigeration systems, hospital oxygen systems, gas and steam heating systems and drain/vent systems all use copper tubes as pipes. They also take up less space than other metal pipes.
In order to ensure safety and quality, all copper tubes must adhere to strict ASTM (American Society for Testing and Materials) standards concerning copper purity, design, fittings and liquid/gas compatibility. They are generally formed by the extrusion process, which fabricates seamless tubes with uniform wall thickness and a smooth surface. Solid-profile copper billets in the shape of rods are heated until malleable and then forced through a series of smaller and smaller molds in the shape of a tube until the desired shape has been reached. After extrusion, they are often bent using rollers or mandrels, and attached to each other at the ends by welding.
Most copper tubes have threaded ends, one male and one female, so they can easily attach and detach from one another. The threading is non-permanent but still provides a reliable, air and water tight seal. Sometimes tubes are joined by brazing, a welding technique that uses nonferrous filler material. A benefit of copper tubes is their flammability and explosion resistance. If a fire does start within the tube, it will not travel farther into the pipe system. Copper tubes can have either soft or hard tempers, which is the metal’s overall hardness. This is accomplished by post-fabrication heat treatments.
크기:최저가:10mm,12mm,16mm,19mm,25mm,30mm,40mm
벽 두께:0.80mm,1.00mm,1.20mm,1.50mm,2.00mm
길이:650mm,1300mm,1500mm,1600mm,2000mm,등.
질문이 있는 경우,당신은 연락을 환영합니다 sales@tubesolutions.com.cn
| GB | ISO | ASTM | 그 |
| TU1/TU2 | Cu-OF | C10200 | C1020 |
| T2 | Cu-RTP | C11000 | C1100 |
| TP1 | Cu-DLP | C12000 | C1201 |
| TP2 | 구리-DHP | C12200 시리즈 | C1220 |
| GB | 구성(%) | |||
| 구리 | 피 | 영형 | 다른 | |
| TU1 | 99.97 | 0.002 | less than 0.002 | balance |
| TU2 | 99.95 | 0.002 | less than 0.003 | balance |
| T2 | 99.9 | – | – | balance |
| TP1 | 99.9 | 0.004-0.012 | – | balance |
| TP2 | 99.9 | 0.015-0.040 | – | balance |
| ASTM | 구성(%) | |||
| 구리 | 피 | 영형 | 다른 | |
| C10200 | 99.95 | 0.001-0.005 | – | balance |
| C11000 | 99.9 | – | – | balance |
| C12000 | 99.9 | 0.004-0.012 | – | balance |
| C12200 시리즈 | 99.9 | 0.015-0.040 | – | balance |
| 등급(중국) | 등급(Japan) | 성질 | 외경(mm) | Tensile strength(음파) | 신장(%) | |
| δ10 | δ5 | |||||
| More than | ||||||
| T2/T3/TP1/TP2 | C11000/C1201C1220 | Y | more than 100 | 315 | – | – |
| more than 100-360 | 295 | – | – | |||
| 2년차 | less than 100 | 235-345 | – | – | ||
| M | 3-360 | 205 | 35 | 40 | ||
튜브솔루션‘ Advantages:
1. 유럽 고객과의 협력,서아시아,북아메리카,남아메리카, Since 2006 등
2. Production of seamless copper tubes & pipes since 2005.
3. 샘플은 다음 기간 내에 배송될 수 있습니다. 15 확인 후 일
4. 35 주문 확인 후 생산 기간 및 배송으로 일.
5. 500,000 meters of seamless copper tubes in stock.
6. 200 크기는 OD에서 제안될 수 있습니다:3mmxWT 님:0.3에 OD:105mmxWT 님:5mm
7. 제3자 검사 좋아요:TUV,증권 시세 표시기,증권 시세 표시기,ETC 허용
8. 전문 팀이 특별한 튜브 요구 사항을 지원합니다..
