Monel 400 Tubo sin costura de aleaciones a base de níquel
Monel 400 is a kind of corrosion resistant alloy with the largest dosage, the most extensive use and the best comprehensive performance.This alloy has excellent corrosion resistance in hydrofluoric acid and fluorine gas medium and good corrosion resistance to hot concentrated alkali liquor.It is also resistant to corrosion of neutral solutions, water, sea water, atmosphere and organic compounds.One of the important characteristics of the alloy is that it generally does not produce stress corrosion cracks and has good cutting performance.
- Descripción
- Indagación
Descripción
ASTM B 163 / B730 / ASTM B165 / B725 Nickel Alloy Pipe Monel 400 / EN 2.4360 / Monel K500 / 2.4375
Monel 400®, Nickelvac® 400, Nicorros® 400 Monel 400 is a combination of nickel and copper and is hardened by cold working only. This alloy is widely renowned for for its corrosion resistant properties against flowing sea – water and is extensively used for marine applications. Monel is also extremely resistant to stress corrosion cracking in most freshwaters. High temperature ( up to 1000 °F) has no effect on this alloy and it also has excellent mechanical properties at subzero temperatures.
Monel 400 is available in many forms like wire , Round bar, Forged bar , hex bar , Flat bar , Circles , Ring , Tubo , seamless Pipe , Welded / ERW Pipe , Sheet , Plate , Coil , Flanges , fasteners , Socket weld Fittings , ferrule fittings , Buttweld fittings Like cap , elbow , tee. UNS N04400 is available in various forms like Monel 400 wire , Monel 400 Round bar, Monel 400 Forged bar , Monel 400 hex bar , Monel 400 Flat bar , Monel 400 Circles , Monel 400 Ring , Monel 400 Tubo , Monel 400 seamless Pipe , Monel 400 Welded / ERW Pipe , Monel 400 Sheet , Monel 400 Plate , Monel 400 Coil , Monel 400 Flanges , Monel 400 fasteners , Monel 400 Socket weld Fittings , Monel 400 ferrule fittings , Monel 400 Buttweld fittings Like cap , elbow , tee , Reducer.
UNS N04400 is available in various forms like cap, elbow, erw pipes, fasteners, fittings, flange, plate, reducer, round bar, seamless pipes, sheet, tee and tube.
Chemical Analysis of ALLOY 400 (UNS N04400) Monel 400®, Nickelvac® 400, Nicorros® 400
| C | MN | P | S | Si | Cr | Ni | M | Cu | Cb +Ta | Al | Fe | other |
| .25máximo | 1.5 máximo | . 01 máximo | .5 máximo | 63.0 min | 27-33 | 2.30- 3.15 | 2.5 máximo |
Características técnicas
| Monel 400 Sheet / Plate | Monel 400 Round Bar | Monel 400 Pipe | Monel 400 Tubo | Monel 400 Fittings | Monel 400 Forgings |
| QQ N 286 | ASME SB-865 AMS 4676 QQ N 286 | QQ N 286 AMS 4676 |
| ASTM B163 Alloy 400 Tubing Standards | ASTM B163/ ASME SB163, ASTM B730/ ASME SB730 UNS 4400 Tubing |
|---|---|
| ASTM B163 Alloy 400 Seamless Tube Size | 3.00 mm OD To 168.30mm OD |
| ASTM B163 Alloy 400 Welded Tube Size | 6.35 mm OD To 219.00 mm OD |
| ASTM B730 Monel 400 Tubing Swg & Bwg | 10 Swg., 12 Swg., 14 Swg., 16 Swg., 18 Swg., 20 Swg. |
| Inconel WERKSTOFF NR. 2.4360 Tubo wall thickness | 0.020″ –0.220″, (special wall thicknesses available) |
| Monel UNS N04400 Tubing Length | Single Random, Double Random, Estándar & Cut length Tube |
| Inconel WERKSTOFF NR. 2.4360 Tubing Finish | Polished, AP (Annealed & Pickled), BA (Bright & Annealed), MF |
| Form | ‘U’ bent, Hollow, Hydraulic, LSAW, Caldera, Straight Tube, Tube Coil, Round, Rectangular, Square Etc |
| Types of 400 Alloy Tubing | Seamless, ERW, EFW, Welded, Fabricated Tube / Tubing |
| 400 Alloy Tube End | Plain End, Beveled End, Treaded Tube |
| Marking | All ASTM B163 Monel 400 Tubing are marked as follows: Estándar, Grade, OD, Thickness, Largura, Heat No. (Or according to the customer’s request.) |
| Aplicación & uses of Monel 400 Tubo | Oil Tube, Gas Tube, Fluid Tube, Boiler Tube, Heat exchanger Tube, |
| Value Added Service | Draw & Expansion as per required Size & Largura, Polish (Electro & Commercial) Annealed & Pickled Bending, Machining Etc. |
| Specialize in | ASTM B163 Monel 400 Tubo capilar & Other Odd Size Monel NCF 400 Heat Exchanger & Condenser Tube |
| Test Certificate | Manufacturer Test Certificate Laboratory Test Certificate from Govt. Approved Lab. Under Third Party Inspection |
Nombre del producto | Tubos de precisión de aleación de níquel |
Diámetro exterior | 6.00mm-914.00mm como su petición |
Espesor de pared | 0.30mm-30.00mm como su petición |
Largura | 1 metros a 6 medidores o como requisito del cliente |
Clasificación de materiales | Aleación Monel：MONEL K-500, Monel400/2.4360, Monel 404 Acero inoxidable especial：904L/UNS N08904/DIN1.4539, 254SMO/UNS S31254,253MA, 316Ti, 347H.
Aleación de Inconel：Inconel840 (S33400), Inconel 686 (2.4606-N06686),Inconel725(NO7725), Inconel713C (2.4671), Inconel625 (2.4856),Inconel602ca(N06625), Inconel601 (2.4851), Inconel600 (2.4816), Inconel 690 (2.4642), Inconel617 (N06617), InconelX-750 (750),Inconel804,Inconel718 (2.4668).
Aleación de Incoloy：Incoloy 800HT, Incoloy 890/1. 6569, Incoloy 810, Incoloy801, Incoloy 840/UNS S33400, Incoloy 20/UNS N08020, Incoloy 926/UNSN08926/1.4529, Incoloy 901/UNS N09901/2. 4662, Incoloy330/UNS N08330/1. 488, Incoloy945/ (UNS N09945) , Incoloy A-286 /(UNSS66286/1.4980) , Incoloy 825/2.4858, Incoloy 925/UNS N09925, Incoloy 800H/800HT/800AT.
Aleación Hastelloy：Aleación HastelloyB-2 / Aleación Hastelloy B-2, Aleación HastelloyB3 / Aleación Hastelloy B3, Hastelloy C-2000 Alloy/HastelloyAlloyC-2000, Hastelloy C-4/Hastelloy AlloyC-4/2. 4610, Hastelloy C-22/Hastelloy AlloyC22, Aleación HastelloyC-276 / Aleación Hastelloy C-276.
Aleación de alta temperatura：GH3308, GH3304, GH4090, GH738, GH3030, GH159 (GH6159) , GH3039, GH3044, GH3536, GH5188, GH1131, GH4141, GH2026, GH738, GH80A,GH4090, GH3600, GH2132, GH3625, GH3128, GH4145, GH4169, GH605 (GH5605) , GH93 (GH4093) , GH159 (GH6159) , Incoloy A-286,Inconel718, Incoloy825/2. 4858. |
Tratamiento superficial | recocido brillante,pulido,encurtido, etc. |
Paquete | Haz, A granel, Bolsas, caja de madera como su petición |
